FRET ROCKER – Stainless Steel Laser Cut – Guitar frets checker

What is a FRET ROCKER?

A fret rocker is a guitar repair tool used to set up the guitar. A fret rocker is a trapezoid shaped piece of metal with each edge precision ground until it is perfectly straight. The fret rocker is used to measure how level each fret is in comparison with its neighboring frets.

How to use?

Each edge of the fret rocker is a slightly different length corresponding to the different spacing of the guitar frets. Take your fret rocker and place it up against the frets of your guitar. The fret rocker should only cover three frets at a time. If it is covering more than three frets, simply turn it to a different edge. Once it covers three frets, you will be able to rock the fret rocker back and forth to see if the middle fret is too high. If the rocker doesn’t rock, those frets are good. Start at the low frets and work your way up the fretboard until you find that high fret. Once you hit the fret, the fret rocker will visibly rock back and forth one the frets like a teeter tauter. Now you can mark that fret for leveling.

Caracteristics:

•  Laser Cut. High Durable. Satin Finish. Sainless Steel
• Sides: 10.00cm;  7.70cm;  5.10cm;  3.70cm.